CAN-OP Isolator Schematics for Curtis Instruments
1232, 1234, 1236 and 1238 "E" Controller Drive Systems Sold By HPEVS
Header Content Region
Insert text, image or banner ads here, or just delete this text and leave this area blank!
Innovation in Motion, Powered by Electricity
What's NewWe have included a variation of the AC-20 motor called AC-23! The motor is wound to produce higher torgue compared to the AC-20 motor! Please check AC-2X motor page for more information!
AC 2x Family of Motors
HPEVS CAN-OP ELECTRICAL SCHEMATICS
Utilizing a CANBUS Isolator is needed to isolate the electric drive system CAN from the vehicles 12 volt.The isolator is needed for Curtis 1232, 1234, 1236 and 1238 "E" motor controllers; THIS IS NOT NEEDED FOR THE 1239 "E" controllers. Failing to isolate the two CANBUS circuits can result in overloading and blowing the CANBUS ciruit in all CANBUS nodes on the electric motor drive system side. The isolator is sold by Advantech and by Mouser Electronics
CAN-OP ISOLATOR ADVANTECH LINK
CAN-OP ISOLATOR MOUSER LINK
Click on graphic to Download