"Innovation in Motion,

Powered by Electricity"

Header Content Region

Insert text, image or banner ads here, or just delete this text and leave this area blank!

HPEVS AC Electric Motor for Mining Industry HPEVS AC electric motors for industrial vehicles HPEVS Troubleshoot and Diagnostics
Mining Vehicle Systems

Specialty motors designed and built for your specific applications!





To get information, please click on "Details" tab below.
Utility Vehicle Systems


We have a drive system to fulfill your utility vehicle requirements!




To get information, please click on "Details" tab below.
Diagnostic and Troubleshooting Documentation.





To obtain this information, please click on "Details" tab below.

small portfolio3 small portfolio5
Innovation in Motion, Powered by Electricity
get in touch
Links to our main drive system page
HPEVS Drive Systems

Power Graphs Link

Schematics, Instructions and Troubleshooting

OC AC 3X (34/35)



We are proud to introduce our new line of Oil Cooled AC motors that are now available.

With the introduction of oil cooling and with the assistance of an external oil pump and an heat exchanger to cool the oil, the continuous horsepower and torque from this motor will be higher than our standard steel frame motor line.

This motor has been designed with the marine industry in mind, but it can be adapted to any other mode of transportation. The motor includes a stainless steel frame with the shaft of the rotor being made of stainless steel too. With anodized aluminum end bells and junction boxes, the motor can stand up to a salt environment.

The motor is the same 8" diameter as the standard steel frame AC-3X motors but now with the use of a junction box, the total height is a little over 11".

The motor is totally sealed which allows for the oil to cool all the internal surfaces of the motor.

Please keep in mind that this new oil cooled design was made with the marine industry in mind. On a marine vessel there is a constant flow of cool lake/ocean water that is supplied to the heat exchanger to cool the oil effectively. If these new systems are installed in anything other than marine, performance results may vary based on how cool the oil is returning to the motor.

The weight of the AC 34 and AC 35 oil cooled motors are 95 pounds/43.9 Kg.

Link to power graphs: Oil Cooled AC-34 POWER GRAPHS!!

Link to power graphs: Oil Cooled AC-35 POWER GRAPHS!!




» IMPORTANT «


DO NOT RUN THE MOTOR WITHOUT OIL!!





Please contact us with any questions you might have:

OEM customers, please contact us


Of course all our systems are backed by an HPEVS and Curtis.



Here is a list of the typical applications for which this motor can be applied:

• Marine
• Light Automotive
• Ground Support
• Mining
• Utility Vehicles


Controller Option:

• 1238-5601 (48V 650A)
• 1238-6501 (72V 550A)
• 1239E-7621 (96V 650A) » 12 volt logic «
• 1239E-8521 (144V 500A) » 12 volt logic «



OC AC 3X-32.26

Oil Cooled "B" Face

ac3x-32.26

1 1/8" Keyed Shaft with an
7/8" Auxiliary Keyed Shaft



OC AC 3X-32.28

Oil Cooled "B" Face

ac3x-32.28



1 1/8" Keyed, Single Shaft






OC AC 3X-33.26

Oil Cooled "C" Face

ac3x-33.26

1 1/8" Keyed Shaft with an
7/8" Auxiliary Keyed Shaft



OC AC 3X-33.28

Oil Cooled C-Face

ac3x-33.28

1 1/8" Keyed, Single Shaft





slide up button